Jobo Instructions

JOBO

FILL WATER AND SET TEMP

YOU ONLY NEED ENOUGH CHEMISTRY TO FILL HALF OF THE TANK( EX: ONLY 250 ML FOR 2 ROLLS OF 35ML….)

TURN THE MACHINE ON, MAKE SURE THE PUMP IS ON& GIVE IT TIME TO GET CHEMISTRY TO THE DESIRED TEMP ( 68F )

WHEN YOU ARE READY, HOOK THE TANK UP TO THE FIXTURE, ADJUST WATER VALVE TO LUBRICRATE AND TO ALLOW YOUR TANK TO MAINTAIN ITS TEMP

WHEN YOU ARE READY TURN DIAL TO P. POUR IN YOUR CHEM

FOLLOW THE STEPS AS YOU WOULD NORMALLY

MAKE SURE TO TURN THE ROTATION OFF WHEN YOU POUR CHEMISTRY OUT.

***MAKE SURE TO HOLD THE BOTTOM OF YOUR TANK WHEN YOU USE THE LIFT TO EASE THE STRESS.
ALSO CHECK TO MAKE SURE THAT AS YOU DUMP YOUR CHEMISTRY OUT THAT THE AMOUNT OF LIQUID IS THE SAME (IF NOT THEN THE LID IS NOT TIGHT)